Companies

EyeVision Technology

EyeVision Technology Articles

Displaying 1 - 20 of 21
Component Management
12th September 2022
3D Pin Inspection with EyeVision 3D software

With the EyeVision 3D software, pins of any shape can be measured and checked for their correct position and reeling circle.

Optoelectronics
20th July 2017
Software supports 3D laser triangulation sensor

It has been announced that the EyeVision software now supports the 3D laser triangulation sensor by QuellTech. The laser scanner products are especially made for the capture of 2D height profiles of objects or also for the capture of 3D point clouds, when the sensor is moved over the object. The EyeVision 3D software is offered in two versions. Firstly, the EyeVision 3D Profile for the evaluation and measurement of 2D height profiles and for the ...

Optoelectronics
14th July 2017
EyeVision software now supports 3D camera

The EyeVision software now supports the Photonfocus 3D camera. Therefore new and various possibilities for the use of the EyeVision 3D software are now available. The laser line detection algorithm of the Photonfocus 3D camera is able to compute the peak position of a laser line with sub-pixel accuracy. Thus, the height profile of an object gets computed within the camera, making additional calculations in the PC needless.

Optoelectronics
27th April 2017
EyeVision software supports Gocator 3D sensor

  EyeVision is now supporting the Gocator 3D sensor from LMI. The software provides the integrated brain of the 3D sensor. It allows the sensor not only to capture an image but also to use the complete 3D command set of the software to measure, compare and read on the 3D point cloud or 2D gray-scale image.

Optoelectronics
18th April 2017
Machine vision software for 3D inspection

EVT Eye Vision Technology has presented the machine vision software for 3D inspection, EyeVision 3D. The command 'Profile Match' is actually a Matching Tool for 1D-applications. The command can detect a profile, shape or pattern, which has been taught-in before. For example the command can be used for the inspection of weld seams or adhesive beads. The command checks if the taught-in profile matches the actual profile. In case the tool detec...

Optoelectronics
21st February 2017
'Say cheese' in compact spaces with finger-sized camera

Three ZYNQ platforms have been offered by EVT for the EyeVision machine vision software. With this variety of ZYNQ cameras, the software user is given a hardware platform for every application of the software. The systems are based on a DualCore ARM with FPGA. Therefore even challenging image evaluation in real time can be solved by programming the FPGA.

Optoelectronics
27th September 2016
All in focus – Software supports autofocus cameras

Now also supporting the USB 3.0 autofocus and zoom cameras by The Imaging Source (TIS) is the image processing software EyeVision. With the new Video Input Channel (VIC) for TIS cameras, the company EVT offers image processing solution with the combination of EyeVision and The Imaging Source.

Optoelectronics
6th April 2016
EyeVision now supports the EyeSpector Z smart camera

The EyeVision 3.2 image processing software by EVT is now also available for the EyeSpector Z series. The smart camera contains the Standard version of the software, but the command set can be extended to contain more commands according to the needs of the customer.

Design
31st March 2016
Calibration tool for 3D scanner integrates into a C++ application

With the MCT3D (Metric Calibration Tool) EVT is presenting a calibration tool for 3D scanner. The tool is available not only for the EyeVision 3D programming software, but also as stand-alone Lib, which can be integrated into a C++ application. When using the MCT3D with the EyeVision software, the calibration function is integrated into the image capture layer EVHD VIC 3D (EyeVision Virtual Hardware Devide).

Analysis
30th March 2016
EyeVision now supports the digital microscope Dino-Lite

The EyeVision image processing software by EVT now supports the digital microscope Dino-Lite. This combination is unbeatable when it comes to machine vision. The Dino-Lite Edge microscope with 5 Megapixel is especially designed for superior image quality, compact form factor and ease-of-use.

Design
5th February 2015
Image processing software supports 30fps camera

  Eye Vision Technology’s EyeVision image processing software now supports Imaging Source’s DFK ECU010-M12 machine vision camera. The camera, which operates at 30fps, is equipped with a 6.35mm CMOS, a rolling shutter and an M12 mount. 

Optoelectronics
6th October 2014
EyeVision 3 with thermal imaging command set

EVT has now developed a command set for thermal imaging.

Optoelectronics
6th October 2014
EyeVision 3 with electrically tunable lens

EVT pesents the new EyeCheck smart camera now with electrically tunable lens by Optotune.

Test & Measurement
12th August 2014
Camera series enables highspeed print inspection

A smart camera family, designated the RazerCam series, has been introduced by EVT. The series includes a line scan camera, making the camera suited to 2D and 3D print layout inspection. The camera is suitable for high-speed applications thanks to the free programmable FPGA data being preprocessed in real time, in addition to the integrated ARM Cortex A9 cores.

Design
29th July 2014
Image processing system updated to support compact-PCs

The image processing system EyeVision 3 has been updated to support compact-PCs from Adlink Technology. The system, from EyeVison Technology, now offers a ready-to-use processing system with PoE for GigE cameras, as well as a complete integration of digital I/Os.     

Optoelectronics
21st July 2014
Vision software claims to be easy to use

Vision software which is suitable for a range of platforms and applications and is claimed to be easy to use, has been released by Eye Vision Technology. EyeVision software includes a range of commands which the GUI allows users to simply drag-and-drop into the prgram editor. A help function also explains each command to the user.

Design
18th July 2014
Image processing software supports Windows and Linux

Eye Vision Technology has revealed that the latest release of its image processing software, EyeVision 3.0, now features support for the Currera R smart camera from XIMEA. Running on both Linux (Ubuntu) and Windows, the integrated, ready-to-use software enables users to create inspection programmes via drag-and-drop programming with just a few mouse clicks.

Test & Measurement
9th July 2014
Camera recognises & classifies demanding surface defects

A surface inspection system, which can be used in all stages of the steel strip production, has been developed using the RazerCam smart camera series. The system, developed by EVT, can be applied in real time due to the free-programmable FPGAs of the camera complex filters. Two different systems are available, which are either equipped with a line scan camera or with a matrix camera. A combination of both camera types is also possible.

Test & Measurement
3rd March 2014
Tool for the precise inspection of adhesive beads

Suitable for the recognition of disruptions, slubs and contractions on adhesive beads, the EyeSens AdBead tool has been announced by Eye Vision Technology. A tool for the inspection of adhesive beads, the core of the machine vision system is a specially developed method for the control of adhesive bead surfaces.

Optoelectronics
5th August 2013
Low priced image processing with EyeVision 3.0 and Raspberry Pi

EVT announces not only the new EyeVision 3.0 software version with Asian language support, but also the support of the low priced and compact Raspberry Pi processor sets image-processing-hearts racing.

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier