Diodes Incorporated has announced the automotive-compliant, AEC-Q100 qualified, and PPAP capable DPO2039DABQ four-channel protection solution for USB Type-C ports. DPO2039DABQ is targeted for use in applications including automotive head units, rear seat entertainment units, and in-car charging.

Diodes Incorporated has announced two highly integrated synchronous buck converters that simplify circuit design in automotive power systems with its Power Good output and its innovative EMI mitigation for noise-sensitive applications.

Diodes Incorporated has announced the PI4ULS3V4857, a SD 3.0-compliant bidirectional level translator for use in communication, consumer, and computing system applications including smartphone handsets, notebooks, SD/MicroSD card readers, wireless access points, and 5G femtocells.

Diodes Incorporated has announced new additions to its expanding portfolio of automotive-compliant logic devices. The 74AHC1GxxQ (standard CMOS) and 74AHCT1GxxQ (TTL compatible) devices are AEC-Q100 grade 1 qualified, manufactured in IATF 16949 certified facilities, and are PPAP capable.

The PI3WVR628 3-lane 2:1 switch from Diodes Incorporated measures just 1.7mm x 2.4mm x 0.5mm.

Diodes Incorporated has announced an automotive-compliant 40V dual MOSFET in a 3.3x3.3mm package. The DMT47M2LDVQ can replace two discrete MOSFETs to reduce the board space footprint in many automotive applications, from electric seat control to advanced driver-assistance systems (ADAS).

Diodes Incorporated has announced the introduction of the PS508 and PS509 analogue multiplexers that are capable of switching signal voltages of up to 36V in an industrial environment. The high voltage capability of the devices will support industrial IoT (IIoT) applications using multiple sensors, including factory automation and process control, battery monitoring systems, and test and measurement equipment.

Diodes Incorporated announced its first precision op amp (operational amplifier). The AS2333 uses chopper stabilisation to achieve ultra-low input offset voltage of 8µV (typical) and near-zero drift (0.02µV/oC, typical) over time and temperature.

Diodes Incorporated has announced the availability of the automotive-compliant ZXTP56060FDBQ and ZXTP56020FDBQ dual PNP transistors. These new products provide OEMs with a highly efficient solution for controlling matrix LED light clusters.

Diodes Incorporated has announced the AP64350Q/AP64351Q/AP64352Q series of automotive-compliant, 3.5A, synchronous buck converters for point of load (POL) applications. The AP6435xQ combines a low quiescent current with a wide input voltage range of 3.8 to 40V.

Diodes Incorporated has announced the AP61100Q, a 5.5V, one amp continuous output current, automotive-compliant, synchronous buck converter for point of load (POL) applications. With a fully integrated 110mΩ high-side power MOSFET and 80mΩ low-side power MOSFET, it provides high-efficiency step-down DC/DC conversion from five and 3.3V input rails.

Diodes Incorporated has announced the AP7353 low dropout regulator, which offers a high power supply rejection ratio (PSRR) in a small package, meeting the need for voltage regulation in noise-sensitive, battery-operated devices such as wearables, portables, and connected sensors.

Diodes Incorporated has announced the introduction of the PI3WVR626, a MIPI D-PHY/C-PHY 2:1 switch that enables a single host device to interface with two MIPI compliant modules, helping engineers optimise the design of multi-camera cell phones and other personal computing devices.

Diodes Incorporated has announced the availability of the first in a new generation of discrete MOSFETs. The DMN3012LEG delivers increased efficiency in a smaller package to provide significant cost, power, and space savings in a wide variety of power conversion and control applications.

Diodes Incorporated has announced an automotive AEC-Q100 grade 3 qualified 10Gbps USB-C DisplayPort Alternate (DP-Alt) mode linear ReDriver IC. The DP-Alt mode allows the transfer of DisplayPort signals through a USB Type-C connector.

Diodes Incorporated announced the PI3HDX12221, an HDMI 2.1 active switch with linear ReDriver that enables manufacturers of TVs, PCs, gaming consoles, and set-top boxes to adopt the latest 12Gbps HDMI standard.

Diodes Incorporated has announced the PI3EQX16612 and PI3EQX16621 PCI Express compliant ReDriver devices offering four differential channels with either 1:2 (demultiplexing) or 2:1 (multiplexing), respectively. PCIe 4.0 is the preferred serial interface for high-performance IT equipment including desktop and laptop PCs and workstations, and for use in embedded systems.

Diodes Incorporated has announced the introduction of its new family of automotive-compliant CMOS clock buffers, designed for low power operation in ambient temperatures of up to 105°C, as found in advanced driver-assistance systems (ADAS), infotainment applications, and automotive gateways.

Diodes Incorporated has announced the company's first families of clock generators and clock buffers that meet PCIe 5.0 specifications while still complying with PCIe 4.0 and previous generations. This gives product developers the forward compatibility they require when developing server, storage, and networking equipment for datacenters that today use PCIe 4.0 but must be ready for the widespread roll-out of PCIe 5.0.

Diodes Incorporated has introduced a series of USB ReDrivers for the industrial, embedded, and consumer market segments. The PI3EQX1004E and PI3EQX1002E are USB 3.2 compliant, 5Gbps to 10Gbps, 2-Port/1-Port, linear ReDrivers. The devices provide adjustable linear equalisation, output swing, and flat gain to optimise performance over a variety of physical media by reducing intersymbol interference.