The launch of Tara, a USB 3.0 Stereo vision camera has been announced by e-con Systems. Tara is based on the 1/3-inch MT9V024, a WVGA Global shutter monochrome CMOS image sensor from OnSemi. The Tara supports Stereo WVGA (1504x480) at 60fps over USB 3.0 in uncompressed format. 

e-con Systems has developed a USB camera application for Android smartphones and tablets. Webeecam supports any camera that conforms to the USB Video Class (UVC) specification which includes an array of off-the -shelf webcams. This makes your USB camera portable and allows you to instantly share the captured images using any social media applications.

A BLE stack for Windows Embedded Compact 2013 has been released by e-con Systems. Windows Embedded Compact 2013 did not have any support for BLE 4.0 thus far. The stack is intended to provide considerably reduced power consumption, size and cost while maintaining a similar communication range as the classic Bluetooth. In many cases, the BLE stack makes it possible to operate the devices for more than a year without recharging.

E-con Systems has announced the launch of its See3CAM_CU130, part of the See3CAM family of USB3.0 UVC compliant cameras. The See3CAM_CU130 is based on AR1820HS CMOS Image sensor from Aptina Imaging and is provided with the S-mount (M12) lens mount that enables customers to choose a lens of their choice.

e-con Systems' See3CAM USB 3.0 cameras now support the NVIDIA Jetson TK1 DevKit for image processing or computer vision applications. The See3CAM family of USB 3.0 cameras are UVC compliant and don't need any special drivers to be installed on the PC or the host side. This is an important feature that enables the customers to use these cameras on almost any platform.

Based on Freescale’s IMX6 processor, the eSOMiMX6 CoM has been introduced by e-con Systems. The ready-to-use SoM utilises Quad, Dual or Solo ARM Cortex A9 Processors running up to a speed of 1.2GHz. The device features eMMC Flash with a capacity ranging from 4 to 64GB, and a 64-bit LVDDR3, with a capacity ranging from 256MB to 2GB.

e-con Systems announces the launch of its See3CAM CU51, part of the See3CAM family of USB3.0 SuperSpeed cameras. The See3CAM CU51, based on MT9P031 Monochrome CMOS Image sensors from Aptina, is provided with the S-mount (M12) lens mount that enables customers to choose a lens to match their specific requirements.

Supporting 720p at 60fps and a resolution of 1280x960 at 45fps, the See3CAM_12CUNIR camera solution has been released by e-con Systems. The small form-factor pluggable solution, which is part of the See3CAM family of USB 3.0 SuperSpeed cameras, houses the e-CAM10_CU0130_MOD with M12 lens mount.

Spica, a barcode scanner application which is compatible with any Windows OS based platform and any Direct Show camera, including Windows embedded, has been released by e-con Systems. The application supports both 2D and 1D barcodes. While the supported 2D barcodes include AZTEC, Datamatrix and QR Code, the 1D barcodes include Codabar, Code 39, Code 128, EAN-8, EAN-13, UPC-A, UPC-E, UPC-E1, 128-A, 128-C, Interleaved 2-of-5 (IFT) and Ext39.

Expanding the company's See3CAM family of USB3.0 SuperSpeed cameras, e-con Systems has announced the See3CAMCU50. The camera is suited for customer applications where the flexibility for choosing a lens is required. See3CAMCU50 can be used in medical devices, such as digital microscopy, dermatology, low vision products, surveillance, video analytics and patient monitoring systems, kiosk, OCR and video conferencing.

e-con Systems announces the See3CAM_30Z10X, a 3.0 MP UVC compliant USB 3.0 optical zoom camera. Being UVC compliant, See3CAM cameras are ‘plug and play’ on Windows and Linux with no additional device driver software required and the cameras work with standard Windows (DirectShow) and Linux (V4L2) software.

Augmenting the company's industrial camera solutions portfolio, e-con Systems has introduced the See3CAM_11CUG, 1.3MP UVCi compliant colour USB 3.0 camera. Supporting standard Windows (DirectShow) and Linux (V4L2ii) software, the UVC compliant See3CAM cameras are "plug and play" on Windows and Linux with no additional device driver software required.

e-con Systems announces the e-CAM51IMX6 5MP Full HD MIPI Camera Board for Wandboard. This low power complete computer is based on the Freescale i.MX6 Development Board. The Wandboard is an open source project built around the ARM Cortex A9 powered Freescale i.MX6 CPU and the e-CAM51IMX6 interfaces directly to the CSI-2 MIPI interface on the Wandboard.

e-con Systems announces the release of 5MP Full HD MIPI Camera Board, e-CAM50IMX6 for Freescale i.MX6 family of processors. The e-CAM50IMX6 camera board is interfaced directly to the CSI-2 MIPI interface on the Freescale SABRE Lite board.

e-con Systems announces the launch of the world’s first UVC compliant USB 3.0 camera as part of its new See3CAM series. Being UVC compliant means that See3CAM cameras are ‘plug and play’ on Windows and Linux - no additional device driver software is required and the cameras work with standard Windows (DirectShow) and Linux (V4L2) software.

e-con Systems Inc. announces the world’s first Stereo Vision camera reference design based on Texas Instruments’ OMAP/DM37x family of processors and Gumstix Overo computer-on-module (COM) series. The Stereo Camera Reference design, code-named Capella, includes a DM3730-based Gumstix Overo Water Storm COM, a Gumstix Tobi expansion board and e-con’s camera daughter board e-CAM_9V024_STEREO.

e-con Systems Inc. announces its video decoder board e-CAMNT_MX53x to support analog camera interface for Freescale i.MX53 Quick start board(QSB). e-con Systems’ e-CAMNT_MX53x video decoder board can be used as a plug-n-play to interface NTSC/PAL camera. Along with the adapter daughter card, e-con systems also provide drivers for Linux. The NTSC/PAL video decoder board has interfaces for both S-Video input and Composite video input (CVBS).

e-con Systems Inc. announces its camera adapter board e-CAMNT_35x_GSTIX to support analog camera interface for Gumstix Overo COMs. e-con Systems, e-CAMNT_35x_GSTIX adaptor board can be used as a plug-n- play to interface NTSC/PAL camera. Along with the adapter daughter card, e-con systems also provide drivers for Linux. This Adapter board shall have support for S-Video IN and CVBS IN.

e-con Systems Inc has announced its second 5MP High definition (HD) camera solution based on OmniVision OV5640 HD CMOS Image sensor for AM37x/DM37x processors from Texas Instruments. e-con Systems’ new camera daughter card e-CAM52 35x has the e-CAM52 5640 MOD, a 5 Megapixel camera module based on OV5640 image sensor.

e-con Systems Inc., a leading camera solutions company based out of St Louis, USA and Chennai, India announces the launch of e-CAM33_USB, a 3.2 Mega Pixel USB camera module housing Autofocus pluggable camera with OV3640 CMOS Image sensor from Omnivision.