TE Connectivity UK Ltd

Address:
Merrion Ave,
Stanmore,
Middlesex
HA7 4RS
United Kingdom

Phone: 01793528171

Fax: +44-208-954-6234

Web: www.te.com


TE Connectivity UK Ltd articles

Displaying 1 - 20 of 24

Dev kit lets designers test and evaluate drive LED holder

Dev kit lets designers test and evaluate drive LED holder
  A development kit has been announced by TE Connectivity (TE) for its new LUMAWISE Drive LED Holder Type Z50, enabling luminaire designers to purchase a single unit for desktop testing, product evaluation and luminaire prototyping. Each kit contains an LED holder, a cable assembly and a thermal interface material.
16th February 2018

Focusing on lighting design for more intelligent ecosystems

Focusing on lighting design for more intelligent ecosystems
TE Connectivity will highlight its latest innovations and products that address key industry trends at the 2018 Light + Building Expo in Frankfurt, Germany. Today, networked lighting platforms require solutions for harsh environments enabling IoT in smart cities to improve energy efficiency, safety and security. The TE team will be on hand throughout the show to discuss how the company’s integrated solutions and functional synergies can help customers get to market quicker.
8th February 2018

Wire-to-board connectors designed for outdoor lighting applications

Wire-to-board connectors designed for outdoor lighting applications
The SlimSeal Connector Miniature compact vertical and right-angle IP67 rated wire-to-board connectors has been introduced by TE Connectivity. Intended for outdoor lighting and other high humidity applications, including commercial refrigeration lighting, kitchen appliances, and HVAC equipment, SlimSeal Connector Miniature connectors meet market calls for smaller connectors with reliable waterproofing.
4th January 2018


Fibre optic electronic packaging gets ruggedised

Fibre optic electronic packaging gets ruggedised
Connectivity and sensor company, TE Connectivity (TE), has released its newly developed optical flex circuit cable assemblies. These compact, robust fibre optic circuits offer a multifibre management solution for high-speed electronic packaging. Fully customisable for both card-to-card and backplane applications, TE’s new optical flex circuits are ruggedised for the harsh environments of aerospace, commercial and military aircraft, and defense systems.
3rd January 2018

Enabling the growth of the safe, secure, smart city

Enabling the growth of the safe, secure, smart city
  With the rapid adoption of LED streetlights, cities across the world are beginning to realise the upgraded utilities are worth more than just their energy savings. They’re enabling smarter cities that offer safer, more secure environments.
18th December 2017

LUMAWISE integrates into new or existing light fixtures

LUMAWISE integrates into new or existing light fixtures
TE Connectivity has unveiled the LUMAWISE dimming receptacle with wire leads pre-terminated with universal MATE-N-LOK connectors, allowing the dimming receptacle to be easily integrated into new or existing light fixtures. This ANSI C136.41 compliant LUMAWISE dimming receptacle with universal MATE-N-LOK connections provides a fully pluggable, electrical and mechanical interconnection between an ANSI C136.41-2013 photo control cell and luminaire.
26th July 2017

Dimming receptacle complies with IEC 61984 Class II

Dimming receptacle complies with IEC 61984 Class II
Global connectivity and sensors provider, TE Connectivity (TE), has introduced the LUMAWISE dimming receptacle with double insulation. This feature allows the dimming receptacle to conform to the safety requirements of IEC 61984, Class II. TE’s ANSI C136.41 compliant LUMAWISE dimming receptacle with double insulation provides a fully pluggable, electrical and mechanical interconnection between an ANSI C136.41-2013 photo control cell and luminaire.
20th July 2017

Cable assembly ensures reliable grounding for indoor lighting

Cable assembly ensures reliable grounding for indoor lighting
A quick and reliable way to ground equipment in applications such as lighting fixtures, HVAC equipment and signage, has been introduced by TE Connectivity (TE), the Ground Clip cable assembly. A grounded light fixture helps provide safety when a wiring circuit malfunctions by ensuring that the fixture will not carry electrical current that can harm an individual. TE’s Ground Clip assembly allows for fast and easy installation due to a design that virtually eliminates the need for fastening ground lead terminals with screws or bolts.
4th May 2017

Integrated solutions to cut time to market for customers' lighting designs

Integrated solutions to cut time to market for customers' lighting designs
  TE Connectivity is unveiling innovations at LIGHTFAIR International (LFI) 2017 that increase efficiency in its customers’ development projects. Taking place in Philadelphia from 9th to 11th May, LFI is the world's largest annual architectural and commercial lighting trade show and conference.
11th April 2017

Wire splice connectors for lighting installations

Wire splice connectors for lighting installations
TE Connectivity (TE) has introduced the new Push Grip wire connectors for electrical installations. These tool-less, poke-in wire splice connectors provide visual termination of solid and stranded wires in gauges from 22-12AWG (0.5–2.5mm2). The connectors are colour-coded according to the number of positions for easy identification, and their compact size enables them to be used in tight spaces. A test slot incorporated into each connector allows for voltage testing.
27th March 2017

New module introduced for smarter street lighting applications

New module introduced for smarter street lighting applications
A new compact connectivity solution for street lighting with LED light sources has been introduced by TE Connectivity (TE). TE´s LUMAWISE Endurance S module consists of a standardised interface between the receptacle and module base or sealing cap. This uses an integrated single gasket that can accommodate and seal both luminaire and module using the same connection interface for either 40mm or 80mm diameter central management systems.
20th March 2017

LED Holder Type Z35 enables easy assembly

LED Holder Type Z35 enables easy assembly
TE Connectivity has introduced the LUMAWISE LED holder type Z35 to provide a higher level of integration via a solderless connection to chip-on-board (COB) LEDs, using standard pan-head and countersunk screws. TE’s new LUMAWISE holder is suitable for LED boards from numerous manufacturers, in two sizes: 13.5x13.5mm and 12x15mm. It enables quick and easy assembly through tape-in LED retention and integrated poke-in wire termination.
8th December 2016

TE Connectivity has joined the connected lighting alliance

TE Connectivity (TE) has joined The Connected Lighting Alliance (TCLA). John Akins, Senior Sales & Marketing Manager of TE-division Intelligent Buildings was presented with the company’s membership certificate by TCLA Secretary General Frank van Tuijl on March 15 during the 2016 Light + Building Expo in Frankfurt, Germany.
23rd March 2016

TE Announces New Extension For The LED Holder Type Z50

TE Connectivity announces the release of extensions of the Type Z50 LED holder. The TE Solderless LED Holder, Type Z50, is a circular LED holder family that is now extended to provide a solderless connection to the Philips Lumileds LUXEON CoB LED array family (20x24), CITIZEN Electronics CLL030/032 and SAMSUNG LC026B/LC040B LEDs. These LED holders form the core of electrical, mechanical, thermal and optical interconnectivity. The Type Z50 LED holder effortlessly integrates with secondary reflector solutions from Carclo Optics and LEDIL enabling a shorter lead time and easier manufacturing process of LED fixtures.
26th July 2013

TE Connectivity Launch The One Position Slimseal SSL Connector For LED Lighting Applications

TE Connectivity Launch The One Position Slimseal SSL Connector For LED Lighting Applications
TE Connectivity today announced the release of the one position free hanging plug and receptacle assembly, an extension to the SlimSeal SSL connector family.
23rd April 2013

TE Connectivity High Power Inverted Thru Board SMT Connector For LED Lighting Applications

TE Connectivity announces the release of the High Power Inverted Thru Board SMT Connector. This lighting interconnect solution provides a means to bring power to aluminum clad and FR4 boards from the underside of the printed circuit board eliminating issues of dressing wires on the top side of LED boards.
12th March 2013

TE Connectivity Announces Solderless Holder Platform For Chip On Board And Array LED's

TE Connectivity Announces Solderless Holder Platform For Chip On Board And Array LED's
TE Connectivity today announced the release of the LED Holder, Type Z50. The LED holder forms the core electrical, mechanical, thermal, and optical interconnectivity for Philips Lumileds LUXEON® K LED and Sharp Electronics MEGA ZENIGATA LED.
25th February 2013

TE Connectivity Announces Solderless Holder For Sharp Mini Zenigata Led

TE Connectivity Announces Solderless Holder For Sharp Mini Zenigata Led
TE Connectivity today announced the release of the LED Holder, Type Z32, for the SHARP Electronics Mini ZENIGATA LED*. The small, low profile, circular Type Z32 LED Holder provides a quick and easy solderless power connection to the Sharp Mini ZENIGATA LED chip on board family, enabling designs to be more reliable, easier to use, and faster to market.
6th February 2013

TE Connectivity Announce Holders For a Large Range Of LED Arrays

TE Connectivity Announce Holders For a Large Range Of LED Arrays
TE Connectivity has announced today the release of an innovative and scalable, solderless LED array holder platform that enables connectivity to a wide range of LED arrays from industry leaders. The TE solderless LED holder is a small, low profile, flexible LED holder that provides a quick and easy solderless connection to chip on board array LEDs.
17th December 2012

TE Connectivity Announces Sockets For Philips Lumileds Luxeon Led Arrays

TE Connectivity announces the release of a family of solderless LED sockets for the LUXEON H, K, and S emitter platforms. Working together the two companies are enabling the lighting industry to adopt LED technology faster and more reliably. “LED technology is driving a customer shift to electronics and we see ourselves as an enabler to make this transformation easier and more productive. The combination of TE and Philips Lumileds technology is very powerful for our customers,” said Bart Broeren, Global Product Manager, TE Intelligent Buildings.
15th October 2012


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPIE Photonics Europe 2018
22nd April 2018
France Strasbourg