IR receiver modules boost optoelectronics portfolio

13th June 2017
Source: Vishay
Posted By : Mick Elliott
IR receiver modules boost optoelectronics portfolio

For remote control in modern flat-panel TVs, three optical components — an IR receiver, red LED, and ambient light sensor — must either fit in the narrow frame or have an optical connection to the front from the back via a light pipe, which reduces the range for the IR receiver.

The TVCastSMD package of the TSOP39xxxTR1 and TSOP59xxxTR1 series is designed to be mounted on a PCB with a side-view orientation.

The board is then inserted into the frame, allowing for placement near the front of the frame for superior remote control performance.

To simplify designs, the devices feature a photodetector, preamplifier circuit, and IR filter in a single four-pin epoxy package.

Featuring a two-lens design for high sensitivity, the IR receivers offer typical irradiance down to 0.08mW/m² and 0.20mW/m², respectively.

The components feature a supply voltage from 2.5V to 5.5V; very low supply current of 0.35mA typical for the TSOP39xxxTR1 series and 0.7mA for the TSOP59xxxTR1 series; transmission range up to 45 metres; and carrier frequencies from 36kHz to 56kHz.

TSOP39xxxTR1 and TSOP59xxxTR1 series devices provide improved immunity against ambient light, are insensitive to supply voltage variations and ripple noise, and are offered in four automatic gain control (AGC) versions for short and long burst codes.

All receivers are RoHS-compliant, halogen-free, and Vishay Green.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

embedded world 2019
26th February 2019
Germany Nuremberg
Wearable Tech Show 2019
12th March 2019
United Kingdom London
AMPER 2019
19th March 2019
Czech Republic Brno Exhibition Centre
LOPEC 2019
19th March 2019
Germany Messe Munchen
RF & Microwave 2019
20th March 2019
France Paris Expo, Porte de Versailles