High precision alignment lasers with small beam profile

Posted By : Enaie Azambuja
High precision alignment lasers with small beam profile

LASER COMPONENTS has announced two additions to its portfolio of high-precision alignment lasers: LT-PLM-635-01-C1 and LT-PLM-IRB-635-01-C1. At the exit point, the beams of these precision modules feature diameters of 1mm and a squint angle of just 0.05mrad, which equals 5/100mm per metre distance from the target. With standard modules, the aberration from the centre of the housing is considerably higher at 8.7mm.

The small exit diameter also produces an exceptionally small dot on the target area allowing for very precise positioning. Due to its higher divergence, their use is recommended at distances of up to 3m.

For longer distances, Laser Components recommend using our standard version with a beam diameter of 4.5mm. Both profiles are available in 24mm housings with M12 connections or as a mobile version with an integrated battery in a 35mm housing.

The so called “squint angle” defines the aberration of the laser beam from the central axis of the housing. This effect can be watched by putting the laser module on a plane surface and rotating it along its longitudinal axis.

The laser spot will then move in a circle on the wall. The laser is positioned so it hits the target at thte desired location. Precision modules are used whenever a target spot has to be aligned to a straight axis.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi