Avago Technologies’ digital optocouplers are used in a wide variety of isolation applications ranging from power supply and motor control circuits to data communications and digital logic interface circuits.
The new ACPL-x2xL 5MBd digital optocouplers require minimum LED drive current of 1.6 mA, and detector IC power consumption of less than 1.1 mA. The detector IC contains a CMOS output stage with glitch-free output during power-up and power-down, and optical receiver input stage with built-in Schmitt trigger that provides logic-compatible waveforms, eliminating the need for additional waveshaping. An internal shield also guarantees high common-mode rejection (CMR) of minimum 25 kV/µs at 1000V common-mode voltage. ACPL-x2xL optocouplers operate at 3.3V/5V power supply with guaranteed AC and DC performance from an extended temperature range of –40°C to +105°C.
The ACPL-M21L, ACPL-021L and ACPL-W21L are single-channel optocouplers in 5-lead small-outline (SO5), 8-lead small-outline (SO8) and stretched 6-lead small-outline (SO6) packages, respectively. Whereas, the ACPL-024L and ACPL-K24L are dual-channels optocouplers in 8-lead small-outline (SO8) and stretched 8-lead small-outline (SO8) packages, respectively.
All new optocouplers are compliant to industrial safety standards such as IEC/EN/DIN EN 60747-5-5 approval forreinforced insulation, UL 1577 and CSA.
The first availableoptocoupler, the ACPL-M21L is immediately available in sample quantities.